SSMP Female Right Angle Connector for RF Cable

SSMP Female Right Angle Connector for RF Cable 

SIPU RF Technology Co., Ltd. unveils the SSMP Female Right Angle Connector for RF Cable (Model: SIPU-SSMP-KW3506), an enterprise-grade micro-miniature push-on connector for high-density modular systems. This connection provides excellent performance from DC to 26.5 GHz with a VSWR of ≤1.45 and an insertion loss of ≤0.12√f (GHz) dB. Designed exclusively for CXN3506 coaxial cable, the right-angle female design is optimised with beryllium bronze contacts, and gold plating for maximum conductivity. This device is designed to MIL and IEC standards, supports ≥500 mating cycles and has been shown to perform reliably over -65°C to +125°C. The connection has a 50Ω characteristic impedance and dielectric withstand voltage of ≥500V and addresses crucial space restrictions in aircraft, test equipment and 5G infrastructure.

SSMP Female Right Angle Connector for RF Cable Specifications

Understanding the precise parameters helps you select the right connector for your RF system requirements.

Product Features & Advantages

Your RF interconnect solution requires both compact design and uncompromising performance. This connector addresses both needs effectively.

The SSMP Female Right Angle Connector for RF Cable features an ultra-compact push-on interface smaller than standard SMP connectors. This design makes it ideal for high-density modular configurations where board space is limited.

The right-angle female configuration enables low-profile cable routing. You can route cables parallel to PCB surfaces, reducing mechanical stress on cable jackets and center conductors. This proves especially valuable in multi-layer board assemblies and enclosed equipment racks.

Beryllium bronze contacts with gold plating ensure long-term reliability. The material combination provides excellent spring characteristics while the gold plating prevents oxidation. You benefit from consistent electrical performance throughout the connector's operational life.

PTFE dielectric material maintains stable electrical properties across the full temperature range. This ensures your signal integrity remains intact whether operating in extreme cold or high-heat environments.

The push-on mating mechanism allows rapid installation without special tools. You can achieve reliable connections in blind-mate situations, speeding up assembly processes while maintaining secure electrical contact under vibration.

Quality Control & Testing

Every connector undergoes rigorous inspection to ensure it meets your performance requirements.

SIPU implements batch-level testing protocols. Each production lot receives plating thickness verification and bonding strength analysis. This ensures the gold plating meets thickness specifications and adheres properly to the base metal.

Dielectric withstanding voltage and insulation resistance receive 100% testing using precision insulation testers. Every connector must meet the ≥500V dielectric strength and ≥5,000 MΩ insulation resistance specifications before shipping.

Environmental compliance testing includes RoHS verification for each batch. You receive products that meet international environmental standards without exception.

VSWR and insertion loss parameters are guaranteed through precision manufacturing and strict dimensional control. The optimized internal geometry maintains signal integrity throughout the 90-degree transition.

Industrial Applications

This connector serves mission-critical applications across multiple high-tech sectors.

Aerospace and Defense Systems: Integrated into phased-array radar assemblies and satellite communication modules where weight constraints and vibration resistance are mandatory. The compact right-angle design fits within tight enclosures while maintaining signal integrity.

Test and Measurement Equipment: Deployed in automated test systems for semiconductor validation and high-speed digital testing. The reliable push-on connection enables rapid reconfiguration without compromising measurement accuracy.

5G Infrastructure: Utilized in massive MIMO antenna arrays and small cell RF front-end modules. The right-angle configuration facilitates complex board-to-board connections within space-limited base station enclosures.

Industrial Electronics: Applied in high-frequency signal processing equipment and radar systems where compact dimensions and thermal stability are essential.

Installation & Compatibility

Proper installation ensures optimal performance and longevity.

The push-on interface requires no special tools. Simply align the connector with the mating interface and apply firm, even pressure until you feel the detent mechanism engage.

This connector is designed exclusively for CXN3506 coaxial cable. Using the specified cable ensures proper impedance matching and mechanical fit. The cable outer diameter matches the connector's grip range for secure retention.

When routing cables, take advantage of the right-angle design. Position cables parallel to mounting surfaces to minimize strain on the connection point. This reduces mechanical stress during equipment vibration or thermal cycling.

Avoid exceeding the 500-cycle mating specification. While the connector provides reliable performance through this range, repeated mating beyond specification may affect retention force and electrical parameters.

Packaging & Delivery

Standard connectors ship within 72 hours from our Xi'an facility. Each unit receives protective packaging to prevent damage during transit. Custom orders follow our expedited production schedule with priority logistics support.

Frequently Asked Questions

Q: What frequency range does the SSMP-SSMP-KW3506 support?

A: This connector operates from DC to 26.5 GHz with specified VSWR and insertion loss performance. The design supports extended frequency applications up to 40 GHz with appropriate testing.

Q: How does the right-angle design affect signal integrity?

A: The optimized internal geometry maintains impedance continuity through the 90-degree bend. VSWR remains ≤1.45 across the full frequency range, indicating minimal signal reflection at the transition point.

Q: Can this connector withstand high-vibration environments?

A: Yes, the push-on detent mechanism maintains secure electrical contact under mechanical stress. The beryllium bronze contacts provide spring force that compensates for minor movements, ensuring consistent performance in demanding environments.

Q: What is the recommended torque for cable attachment?

A: The connector uses a push-on interface rather than threaded coupling. No torque specifications apply. Proper assembly involves firm pressure until the detent engages.

Q: Is this connector RoHS compliant?

A: Yes, each production batch undergoes RoHS testing. All materials meet current environmental compliance requirements for global markets.

Contact Us

Ready to integrate the SSMP Female Right Angle Connector for RF Cable into your next project?Reach out to us at info@sipuconn.com for product specifications, custom requirements, or application guidance.